Electrician Resume Example

Also called Journeyman Electrician, Electrical Apprentice, Master Electrician.

Contractors hire electricians on license, type of work and safety record. Put your license level and state near the top, then show the kinds of jobs you run and how they pass inspection.

Use this exampleBrowse all templates

Opens in the builder with this text in place, ready for you to replace with your own.

What this example does well

  • License level and state are in the headline and certifications, the first thing a contractor checks.
  • First-time inspection passes and zero lost-time injuries give proof of quality and safety.
  • Apprenticeship hours are counted, which shows how the license was earned.

Updated

Jake Morrison

Journeyman Electrician

Summary

Licensed journeyman electrician with eight years of experience in commercial and light industrial work. Leads crews of two to four on tenant fit-outs and service upgrades up to 2,000 amps. Every job in the last three years passed inspection the first time, with no lost-time injuries.

Experience

Journeyman Electrician, Hill Country Electrical Contractors

Apr 2021 – Present Austin, Texas

  • Lead crews of two to four on commercial fit-outs, from rough-in to final trim and testing.
  • Installed service upgrades and switchgear up to 2,000 amps for offices and warehouses.
  • All 46 jobs in the last three years passed inspection on the first visit.
  • Read blueprints and coordinate with general contractors, plumbers and HVAC crews on site.

Electrical Apprentice, Capital City Power Services

Jun 2017 – Mar 2021 Round Rock, Texas

  • Completed a four-year apprenticeship with 8,000 hours on the job and 576 hours of classroom training.
  • Pulled wire, bent conduit and installed panels, lighting and receptacles in commercial buildings.
  • Troubleshot faults in motor controls and lighting circuits with the journeyman.

Education

Electrical Apprenticeship Program, Capital Area Electrical Training Center

2017 – 2021 Austin, Texas

Skills

Commercial wiring, Conduit bending, Service upgrades and switchgear, Blueprint reading, National Electrical Code, Troubleshooting, Motor controls, Crew leadership

Certifications

  • Journeyman Electrician License — Texas Department of Licensing and Regulation
  • OSHA 30-Hour Construction — 2022
  • NFPA 70E Electrical Safety — 2025
An example: Jake Morrison is not a real person, and the details show the kind of thing to write rather than a real career. Shown in the Docket template. Words that postings for this job often use are marked in yellow.

How do you write a summary for an electrician resume?

Two to four lines at the top that say what you do, for how long, and what you are best at. Here is one for each stage of a career.

  • Entry level

    First-year electrical apprentice with 1,800 hours on residential and light commercial jobs. Comfortable pulling wire, bending conduit and installing devices under supervision, and completed OSHA 10. Reliable, careful and keen to learn the code.

  • Experienced

    Licensed journeyman electrician with six years of experience in residential and commercial work. Installs, troubleshoots and repairs electrical systems to code and leads small crews.

  • Senior

    Master electrician and project foreman with fifteen years of experience. Runs commercial projects of up to $3 million, supervises crews of 15, estimates jobs and keeps sites safe and on schedule.

How to write a resume summary, with more examples

What are good bullet points for an electrician resume?

Each starts with a verb and says what was done. Change the details and numbers to your own; a number you cannot explain in an interview is worse than none.

  1. Installed wiring, panels, lighting and devices in commercial buildings to the National Electrical Code.

  2. Bent and installed EMT and rigid conduit to plans.

  3. Troubleshot and repaired faults in lighting, power and motor control circuits.

  4. Upgraded electrical services and installed switchgear up to 1,200 amps.

  5. Read and followed blueprints, schedules and specifications.

  6. Passed city inspections on the first visit on every job for two years.

  7. Led a crew of three and trained two apprentices.

  8. Followed lockout and tagout and arc flash procedures on every job.

  9. Installed fire alarm, data and low-voltage systems.

  10. Kept accurate job records, material lists and time sheets.

Which skills should an electrician put on a resume?

Pick the ones the job posting asks for and that you can back up with an example from your work.

Hard skills

  • Residential, commercial or industrial wiring
  • Conduit bending
  • Panel and service installation
  • Troubleshooting with meters and testers
  • Blueprint reading
  • National Electrical Code
  • Motor controls and PLC basics
  • Low-voltage and fire alarm systems

Soft skills

  • Safety focus
  • Problem solving
  • Reliability
  • Teamwork on site
  • Attention to detail

Licenses and certifications

  • State journeyman or master electrician license
  • OSHA 10 or 30-Hour Construction
  • NFPA 70E electrical safety training
  • First aid and CPR

Which keywords belong on an electrician resume?

The words recruiters and applicant tracking systems search for.

  • commercial
  • inspection
  • conduit
  • switchgear
  • blueprints
  • crews
  • service upgrades
  • troubleshot
  • panels

Use the ones that are true for you, written the way the posting writes them, and put each where it shows something you did. A list of keywords with nothing behind it helps nobody. To keep them readable by software, choose an ATS-friendly template, and read how applicant tracking systems read a resume.

Where should an electrician put their license?

In the headline or first line of the summary, and again in the certifications section with the state. Contractors cannot send you to a job without the right license, so make it impossible to miss.

If you are an apprentice, give your year and hours instead, and the date you expect to sit the journeyman exam.

How do you show quality work as an electrician?

Inspection results, callbacks and safety record. A run of first-time inspection passes or years without a lost-time injury says more than any adjective.

Describe the type and size of jobs, such as the amperage of services or the square footage of buildings, so the reader knows what you can handle.

What do employers in the trades look for in a resume?

  • Put licenses, tickets and safety cards near the top with their numbers or levels. Without them you cannot be sent to site.
  • Name the kind of work: residential, commercial, industrial, or the materials and processes you are qualified in.
  • Safety record and rework are the numbers that matter. Days without a lost-time incident and inspections passed first time say you can be trusted.

All trades and engineering resume examples

Questions about an electrician resume

Should an electrician list tools?

Mention specialized equipment only. Everyone expects you to know hand tools.

Is residential experience useful for commercial jobs?

Yes. Stress code knowledge, troubleshooting and any larger projects you worked on.

Should I include my driver's license?

Yes, if the job needs driving between sites or a company vehicle.

How long should an electrician resume be?

One page.

Make this electrician resume yours.

Start from the example, swap in your own jobs and numbers, and switch to any template without retyping a word.

Use this example